Verstärker / PA-Endstufen Solton Acoustic
Über unsere Professional Power Amplifiers
Die QX Serie von aa CRAAFT Endstufen sind professionell entworfen und für den Road Einsatz gebaut. Die Serie umfasst drei Modelle QX 700, QX 1600 und QX 2400. Alle sind robust gebaut und unübertroffen in Preis/Leistung. Weitere Besonderheiten der QX 1600 und QX 2400 Endstufe ist die regelbare Frequenzweiche, automatisch regelnde Lüfter, XLR eingänge, Speak und open end anschlüsse, umfangreiche Schutzschaltung und mehr. Die QX 1600 und QX 2400 liefern auch im Grenzlastbereich und an 2 -ohm volle Leistung. Alle QX Endstufen haben eine Garantie von 2 Jahren.
QX 700
8 Ω per channel (watt) |
200 |
4 Ω per channel (watt) |
350 |
8 Ω bridged (watt) |
650 |
THD 20 Hz - 20 kHz |
< 0,1 % |
Damping Factor |
(10-400 Hz at 8Ω) 300:1 |
Impedance |
20 KΩ Bal./10 KΩ Unbal. |
Hum and Noise |
|
("A" weighted, -80dBW |
98 dB |
Power Switch |
On/Off |
Volume |
Ch 1 / Ch 2 |
Input connectors |
XLR Female |
Link connectors |
XLR Male |
Mode Switch |
Bridge / Stereo / Parallel |
Sensitivity Switch |
1,4 V / 1,0 V / 0,775 V |
Output connectors |
Speak / Binding Posts |
Power Supply |
230 V / 50 Hz |
Protection Circuit |
Short circuit protect, overload protect |
Soft Start |
Yes |
Fuse |
8 A |
Class |
AB |
Dimensions (W x H x D) |
|
Chassis (mm) |
483 x 44 x 400 |
Packing (mm) |
585 x 110 x 590 |
Weight (kg) |
|
Net Weight |
10,5 kg |
Gross Weight |
13,5 kg |
QX 1600
8 Ω per channel (watt) |
500 |
4 Ω per channel (watt) |
750 |
2 Ω per channel (watt) |
900 |
8 Ω bridged (watt) |
1500 |
4 Ω bridged (watt) |
1800 |
THD 20 Hz - 20 kHz |
< 0,1 % |
Damping Factor |
(8Ω, 1f = 1kHz) 500 |
Impedance |
20 KΩ Bal./10 KΩ Unbal. |
Hum and Noise |
|
("A" weighted, -80 dBW |
95 dB |
Power Switch |
On/Off |
Volume |
Ch 1 / Ch 2 |
Input connectors |
XLR Female |
Link connectors |
XLR Male |
Mode Switch |
Bridge / Stereo / Parallel |
Ground Switch |
On/Off |
Sensitivity Switch |
1,44 V / 1,0 V / 0,775 V |
Filter Switch per channel |
Low / By / High Pass |
Poti for Crossover |
80 Hz - 250 Hz |
Output connectors |
Speak / Binding Posts |
Power Supply |
230 V / 50 Hz |
Protection Circuit |
Short circuit protect, overload protect |
Soft Start |
Yes |
Fuse |
15 A |
Class |
H |
Dimensions (W x H x D) |
|
Chassis (mm) |
483 x 88 x 425 |
Packing (mm) |
530 x 150 x 560 |
Weight (kg) |
|
Net Weight |
17,8 kg |
Gross Weight |
20,9 kg |
QX 2400
8 Ω per channel (watt) |
750 |
4 Ω per channel (watt) |
1100 |
2 Ω per channel (watt) |
1350 |
8 Ω bridged (watt) |
2200 |
4 Ω bridged (watt) |
2700 |
THD 20 Hz - 20 kHz |
< 0,1 % |
Damping Factor |
600 |
Impedance |
20 KΩ Bal./10 KΩ Unbal. |
Hum and Noise |
|
("A" weighted, -80 dBW |
98 dB |
Power Switch |
On/Off |
Volume |
Ch 1 / Ch 2 |
Input connectors |
XLR Female |
Link connectors |
XLR Male |
Mode Switch |
Bridge / Stereo / Parallel |
Ground Switch |
On/Off |
Sensitivity Switch |
1,44 V / 1,0 V / 0,775 V |
Filter Switch per channel |
Low / By / High Pass |
Poti for Crossover |
80 Hz - 250 Hz |
Output connectors |
Speak / Binding Posts |
Power Supply |
230 V / 50 Hz |
Protection Circuit |
Short circuit protect, overload protect |
Soft Start |
Yes |
Fuse |
20 A |
Class |
H |
Dimensions (W x H x D) |
|
Chassis (mm) |
483 x 88 x 425 |
Packing (mm) |
530 x 150 x 560 |
Weight (kg) |
|
Net Weight |
18,8 kg |
Gross Weight |
21,9 kg |